*******************************************************
VIDEO TUTORIAL TO UPLOAD MAPS: https://www.youtube.com/watch?v=9-puRndE3tE&t=17s
Remember to do the ZERO TPS after every programming.
*******************************************************
Follow this process:

– download the map from our site > download area > https://www.tomasinracing.net/docs/ choose T500 as “reference” and “T500 ECU maps > and just SUBMIT button to see the maps available;
– create a folder on the desktop for the T500 maps (we suggest creating sub-folders with the dates);
– connect the motorbike’s control unit or, if disconnected from the motorbike, only the control unit, check that at the bottom left the status changes to “T500 connected”;
– open the latest version of “Spark” > download Spark here:
https://www.aim-sportline.com/en/sw-fw-download.htm
– download the latest firmware version from the “Spark” cloud (cloud icon at the top right). Do not move the Firmware from the Spark motherboard and check if it is already programmed
– open the map previously downloaded in the dedicated box at the top left;
– press the connect button;
– activate the control unit programming with the dedicated button, wait for the end of programming message and press OK
– disconnect the control unit with the dedicated button;
– disconnect the PC from the motorbike or from the control unit if removed from the motorbike;
– carry out the TPS reset procedure with the motorcycle buttons as shown in the video > https://www.youtube.com/watch?v=R4i1VFZLaUg